At 8:04 PM -0500 11/5/98, K & H Darwin wrote:
>What is the easiest way to disable (or silence) the auxilary relay in the
>Corsair II. I suppose I could remove it but I was thinking it would be
>smoother if I was able to simply tie some control line to power or
>something to make the relay stay open all the time.
Kieth -- on my Omni V I found the easiest answer I received was to remove
the plastic relay cover (lifts right off on the Omni - not sure about
Corsair) and insert a small piece of cardboard between the relay elements.
5 min of work and now the shack is quiet again :-) Easy to undo should I
ever sell the rig -- not likely! ;-)
73 T.E. 'Doc' Drake W5TB
Arlington, TX firstname.lastname@example.org http://www.qsl.net/w5tb/
QRPARCI # 3252 NORCAL #1002 QRP-L #673 FISTS # 5365
ARRL Life Member
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com