Many others have reported that this has fixed their Omni Six's clicking
problem. Don't let John's remarks discourage you from at least trying the
disconnection of plug 52. You've got nothing to lose in trying it except a
little time and there is nothing invasive about it. If it doesn't work for
you, simply reconnect plug 52. There may be multiple causes to what we're
hearing and this may only be one of them.
From: Dale L. Martin <email@example.com>
To: Ten-Tec Reflector <Tentec@contesting.com>
Date: Sunday, November 22, 1998 10:12 AM
Subject: Re: [TenTec] Ten Tec Cure for Clicking Omni 6 a No Go
>Let's beat this thing to death here....Two weeks ago, I sat
>through the whole SS CW Contest with the 'clicks'.
>I even ran the sidetone down to zero (off) and the clicks were
>still present in the internal speaker, headphones, and external
>Has anyone done any further investigation as to the source of the
>I'm going to see if I can borrow an oscilloscope from our club
>test bench and see if i can follow the noise backwards to it's
>source...at least to the board it may be sourced from.
>I don't know about others, but the heightened awareness of it's
>existence has now placed the 'click' on the same level as a
>dripping water faucet in the bathtub.....
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Administrative requests: tentec-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com