I have a suspicion that not all Omni VI+'s have this problem. I'm
usually annoyed by this kind of thing (and traded my Centaur on a
Centurion due to noise). But I don't hear a "click" on the sidetone
keying on my exactly-one-year-old VI+. Maybe something changed in the
production, or maybe there is a lot of bad components? Maybe I'm going
deaf? (huh, what's that you said?!)
73, Duane AC5AA
On Sun, 22 Nov 1998 07:59:08 -0800 "John & Annette Nicholson"
>Disconnecting plug 52 did not reduce the speaker/headphone click
>when I performed this mod 3 weeks ago. I agree that it is ANNOYING
>and NOT in keeping w/ the performance I expect from a Ten Tec,
>a rig known for it's cw prowess.
>Good luck and let's hope someone has the answer for this one...
>73 John K7FD
>From: Paul Christensen <firstname.lastname@example.org>
>To: Ten Tec <email@example.com>
>Date: Sunday, November 22, 1998 7:27 AM
>Subject: Re: [TenTec] Ten Tec Cure for Clicking Omni 6 a No Go
>>Have you tried disconnecting plug 52 on the IF/AF Circuit Board? My
>>had the same problem and after bypassing the sidetone "wraparound"
>>the problem went away completely.
>>If you haven't tried it, simply unplug connector 52. If it works for
>>use a tie-wrap and fasten it next to an adjacent cable bundle. The
>>circuit still works without it, only now the volume control controls
>>the sidetone mix is still adjustable using your "ST" button. They
>>have designed it like this from the beginning.
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Administrative requests: tentec-REQUEST@contesting.com
Duane A. Calvin, AC5AA
ac5aa@Juno.com -or- firstname.lastname@example.org
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com