I have an Omni VI Plus new this summer, which replaced my venerable TT Delta
which I ran (flawlessly) for about 16 years - also new when I got it. The only
place when the the Delta measured up was in qsk. I could hear the other station
between my dots and dashes just as well at up to 35 wpm (not that I send that
fast very often or very well) with the Delta. In fact, the Delta may have been
bit smoother in that department. The Omni VI with a 500 hz filter in the 9 mhz.
IF and a 250 mhz. filter in the 6.3 mhz IF beats the Delta for selectivity. The
Omni wins the sensitivity comparison hands down. It is as if the bands just
opened up when the Omni got plugged into the same antenna.
Pushing the "nr" digital filter button on the Omni will make a morse code signal
leap out of the background, which I may otherwise have been virtually unable to
copy. In the 6.3 mhz if I run the 250, 500 and 1.8 filters. I run 500 and 1.8
in the 9 mhz. if. Some have said that I could get more selectivity if I ran the
250 hz filter at 9 mhz., but my discussions with the techies at TT suggested
I would not gain that much, so I stuck with the 500 hz filter since I have the
250 in the other IF. I don't use the 1.8 khz filter in the 9 mhz IF that much,
but it is there when I need it. Audio quality on SSB does degrade when both 1.8
khz filters are in line, but one can copy what is said.
I also liked the outboard vfo on the Delta 580, and used it a lot when I chased
DX. If I can find the room on my desk I may put the Delta 580 out there as an
aux. receiver just for picking out the one station that a DXer is responding to.
The PBT is useful more on ssb than CW, but probably only because I have the
narrow filters and don't seem to need to use it.
All in all, the Omni VI is a wonderful rig and I have enjoyed every moment I
had it. It has performed flawlessly, especially with some of the good
other-side-of-the-world DX available of late on 20 meters. I don't think you
could go wrong with one, new or used.
Best of luck in what you do decide to get. Best holiday greetings.
Pewee Valley, KY.
> Thanks for the responses to my recent posting. Now, let me put the inquiry in
> a different form in light of what I've learned recently.
> I am seeking to purchase a Paragon or Omni V or even an Omni VI in good shape
> from either Ten Tec or a private owner.
> Please let me know which specific filters your rig currently contains.
> I am not particularly interested in matching power supplies, keyers,
> transverters, etc. I wouldn't mind having a matching TenTec microphone or
> complementary non-TenTec mike, though.
> General coverage reception is less important to me than a rig with super CW
> reception capability. SSB is an attendant but secondary issue. I am
> primarily concerned about the filters currently installed in your previously
> owned rig.
> I also would like impressions about whether or not the OMNI V/VI receiver is
> significantly more useful on a practical basis for use on the amateur bands
> only than the Paragon receiver.
> What are your various impressions of the rigs I've mentioned, most
> specifically in terms of reception?
> I have owned TenTec rigs in the past from the 540 to the Argosy I, Delta 580
> and on to the Omni C. I still have the Argosy I which served me as a mobile
> rig until a year or so ago.
> Any and all responses will be appreciated.
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: email@example.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
> Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com