TenTec
[Top] [All Lists]

[TenTec] OMNI 6 PLUS, 250 hz Filter Problems

To: <tentec@contesting.com>
Subject: [TenTec] OMNI 6 PLUS, 250 hz Filter Problems
From: royanjoy@ncn.net (Roy Koeppe)
Date: Fri, 29 Jan 1999 11:18:08 -0600
I presume you have fiddled with the PBT control? Contrary to what many
claim, the 250 filters do have more loss than the 500's do. The added loss
does make for a nice quiet background though, so QSK is less fatiguing.

73,     K6XK
-----Original Message-----
From: RLVZ@aol.com <RLVZ@aol.com>
To: tentec@contesting.com <tentec@contesting.com>
To: <tentec@contesting.com>
Date: Thursday, January 28, 1999 11:03 PM
Subject: [TenTec] OMNI 6 PLUS, 250 hz Filter Problems


>
>I just purchased Model 219 & 282-  250 hz filters from Ten-Tec and have a
>problem: Filter 219 in the 9 Mhz IF works fine whether operating alone or
in
>tandem with the Model 285- 500 hz filter in the 6.3 Mhz IF.  However, the
>Model 282- 250 hz filter in the 6.3 Mhz IF does not work well at all...
when I
>kick in the 282 the desired signal drops 5 to 9 S-units and the audio is
not
>as clear.  (sounds more high pitched).
>Ten-Tec got me out a new 282 filter right away... but no improvement.   I
have
>tried changing the gain jumper for the filter and tried various cw offsets
>with no change.
>Any ideas?  Thanks,  Dick-K9OM
>
>--
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>