[Top] [All Lists]

FW: [TenTec] Omni V Service Manual?

To: <tentec@contesting.com>
Subject: FW: [TenTec] Omni V Service Manual?
From: tscott@eni.net (Tom Scott)
Date: Mon, 8 Feb 1999 11:29:20 -0800
John asked me what response I'd gotten to my request about a Ten-Tec Omni V
service manual, so I thought I'd follow up here for others to give feedback.
I'm sure that such a thing must exist internally at Ten-Tec, but I gather
that they don't make them available to the public. Some responded to me that
the service manual was in the owner's manual, and I grant you that the
documentation is very good. An experienced engineer could do anything he
wanted to do without much more, but a service manual should detailed
procedures for alignments and signal checks that indicate voltages, signal
levels, distortion levels, etc. Even the Ten-Tec owner's manuals, as good as
they are, aren't what I would call a service manual. I would very much like
to get one for my Omni V, but it would appear that short of bribing someone
at the factory, it isn't likely.
It seems kind of strange that Ten-Tec won't supply these. My dad's comment
was that it must mean that Ten-Tec doesn't want to encourage owner's to work
on their own radios. But I have always sort of thought that was part of the
appeal of Ten-Tec. I'm not sure why you would bother to put schematics in
the owner's manual otherwise.
Is it possible that Ten-Tec really doesn't have that sort of service
information documented anywhere? I suppose that they could use automatic
test equipment so that the only real source of a test procedure would be a
the ATE test program, but even then I'd think they would document it to be
human readable as well.
* Tom
Tom Scott     -    Wyle Electronics    -    KD7DMH
10300 SW Nimbus Ave #PB, Portland, OR 97223
       503-603-1931 - TEL   503-684-6620 - FAX
       503-504-1583 - Cell    503-604-8651 - Pager

-----Original Message-----
From:   John Lockhart [mailto:jlockj@minn.net]
Sent:   Sunday, February 07, 1999 7:22 AM
To:     tscott@eni.net
Subject:        Re: [TenTec] Omni V Service Manual?

Hi Tom,

Curious whether you received any replies on the existence of service manuals
for the Omni V.  I have a "V" here and would like to have a service manual
in case it has a problem in the future.
John  W0DC
-----Original Message-----
From:   Tom Scott <tscott@eni.net>
To:     'Ten-Tec Users Reflector' <tentec@contesting.com>
To: <tentec@contesting.com>
Date:   Tuesday, January 26, 1999 09:36
Subject:        [TenTec] Omni V Service Manual?

>Does Ten-Tec offer service manuals for their radios, specifically my Omni
>I don't think my radio hears as well as everyone seems to agree that an
>V ought be able to. I'm getting curious about getting it tuned up. What
>should I expect them to charge for this? (I know, I can call and find out,
>but I may not get a chance during hours they're open for a couple days.)
>- Tom
>       Tom Scott     -    Wyle Electronics    -    KD7DMH
>       10300 SW Nimbus Ave #PB, Portland, OR 97223
>       503-603-1931 - TEL   503-684-6620 - FAX
>       503-504-1583 - Cell    503-604-8651 - Pager
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm

FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>