The table in the manual shows "nominal" tuning for the low end of 160,
80, 40, and 30 meters being "9" on the Load control. On 15m it's "5".
Looks like your tunings aren't very far off what is considered nominal.
Differences in load reactance will cause that setting to vary. My
Centurion (RF Parts 3-500ZG's) hits the mark pretty closely on my HF2V
vertical, but required higher loading settings on the G5RV Jr. YMMV.
("your mileage may vary")
73, Duane AC5AA (love my Centurion!)
On Mon, 22 Feb 1999 22:16:25 -0500 "KN4AB" <email@example.com> writes:
>Got my new "used" Centurion this weekend. Puts out between 1000 and
>wts keydown on 160-15 mtrs with Omni VI at full output. Tubes are
>160-40 the load control is counterclockwise as far as it can go to
>into a dummy load. On 15 mtrs it is at "6". Is this normal? 73
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Administrative requests: tentec-REQUEST@contesting.com
Duane A. Calvin, AC5AA
firstname.lastname@example.org -or- email@example.com
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com