TenTec
[Top] [All Lists]

[TenTec] WARC on Delta 580

To: <tentec@contesting.com>
Subject: [TenTec] WARC on Delta 580
From: prvalko@oakland.edu (Paul R. Valko)
Date: Wed, 24 Mar 1999 23:11:21 -0500 (EST)

On Wed, 24 Mar 1999 K1epj@aol.com wrote:

> I have a Delta 580 that won't transmit or receive on 30, 17 or 12 meter bands.
<snip>
> did not have crystals for these bands but the freq display on my delta is
> correct so I'm assuming that the crystals are installed. 

It's been a long time since I owned a Delta, but I *believe* you had to
order the MIXER OSC crystals.  The display, like most Ten*Tecs, is
mechanical/electronic (i.e. a bandswitch tells the display which MHz LEDs
to light up).  The KHz digits are derived from the VFO.  So of course
there is a display, but without the mixer osc, no TX/RX.

But that's just an opinion, I could be wrong.

73! =paul= W8KC
Collector of Ten*Tecs and other fine plastics
<http://www.acs.oakland.edu/~prvalko>  




--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>