TenTec
[Top] [All Lists]

[TenTec] Re: RF on mic input

To: <tentec@contesting.com>
Subject: [TenTec] Re: RF on mic input
From: turner@rome.ics.uci.edu (Clark Savage Turner)
Date: Tue, 11 May 1999 13:07:47 -0700
I had RF on my SSB audio and found that running my ground wire
directly (and only) to the back of the rig cured it.  I used
to have a buss, where I hooked up the tuner, rig and other stuff
to ground, and the ground wire was also connected to the shield
of the coax at the base of the vertical I use.  I  took the ground
wire off everything, hooked it directly to the back of the rig and
everything else hangs off the rig now, problem went away.

No explaining some of these things :-) 

Clark
WA3JPG

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>