TenTec
[Top] [All Lists]

[TenTec] INRAD filter specs

To: <tentec@contesting.com>
Subject: [TenTec] INRAD filter specs
From: dacalvin@us.ibm.com (dacalvin@us.ibm.com)
Date: Wed, 16 Jun 1999 12:04:21 -0500


I was just poking around the INRAD site and checked out some of the filter
curves.  I see they are prone to a little specsmanship - their "400 Hz" filters
for the Omni are really 490 Hz at 6 dB down (both the 750 and 753 filters), and
the "250 Hz" #751 filter is actually 340 Hz at 6 dB down.  I supposed they made
up what they could with good shape factor that would be nominally close to the
button markings on the rig, but I think I'd have called the 400 Hz filters 500
Hz instead.  That said, I wonder what the Network Sciences filters' bandpass
curves look like.

     73,  Duane   AC5AA  (with one INRAD 400 Hz <really 420> installed in an old
IC-735...)

Duane A. Calvin
Server Systems Test Engineer
Dept. 76TS   RS/6000 - SP Nodes
IBM Austin, TX      >O<     Tie: 793-3368



--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] INRAD filter specs, dacalvin@us.ibm.com <=