I just fired up my OPTION 3 upgrade for the first time and now I wish I had
a Triton, too! In my case they remembered the manual pages but seem to have
forgotten something more important. My Omni no longer hears or transmits! I
just spent $275 to convert a high performance rig into a very expensive
white noise generator!
So far the obvious checks don't show anything. Connected to a dummy load the
rig doesn't even draw more current when keyed, let alone produce output.
Connected to an antenna I hear nothing except audio noise when the gain is
cranked all the way up. I can change the envelope by manipulating the new
dsp controls, but I had hoped to actually work something other than noise!
I wonder if these upgrades were checked at all before they went out the
Bruce, W3GDZ, nr Seattle.
----- Original Message -----
From: Michael O. Hyder <N4NT@wireco.net>
To: Jim Reid <firstname.lastname@example.org>; Michael A. Knox <email@example.com>;
Sent: Sunday, August 01, 1999 7:46 PM
Subject: Re: [TenTec] OPTION 3 upgrade
> Boy am I glad I've got a Triton!!!!!!!
> ----- Original Message -----
> From: Jim Reid <firstname.lastname@example.org>
> To: Michael A. Knox <email@example.com>; <firstname.lastname@example.org>
> Sent: Sunday, August 01, 1999 9:22 PM
> Subject: Re: [TenTec] OPTION 3 upgrade
> > Mike wondered:
> > "The CLOCK is not set to the correct time! Yep, you
> > guessed it, that one I haven't figured out yet....and it is
> > really annoying me! Darn thing is set to a time that
> > isn't even close...."
> > Mike,
> > In the VI+, you go to USER MENU 1.
> > Select CCd. Enter the hours and minutes
> > beginning with a zero if necessary. The clock
> > will begin counting when the lst digit is
> > entered.
> > How do you get to the USER MENU's?
> > Press and hold the LOCK button for about 2 seconds.
> > The readout will ask, "choose". Press either 1, 2, or 3.
> > Use the main tuning knob to scroll though the items.
> > Then use the UP/DOWN arrow buttons to change the
> > status of a selected item. To switch to another item,
> > press the LOCK button once again, then select the
> > new item. To exit, press the LOCK button twice.
> > Now I am surprised you didn't figure all that out
> > without a manual!! Hi.
> > 73, Jim, KH7M
> > On the Garden Island of Kauai
> > --
> > FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> > Submissions: email@example.com
> > Administrative requests: tentec-REQUEST@contesting.com
> > Problems: firstname.lastname@example.org
> > Search: http://www.contesting.com/km9p/search.htm
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: email@example.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
> Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com