[Top] [All Lists]

[TenTec] Trouble Tuning in CW Signals

To: <tentec@contesting.com>
Subject: [TenTec] Trouble Tuning in CW Signals
From: turner@rome.ics.uci.edu (Clark Savage Turner)
Date: Wed, 04 Aug 1999 18:18:15 -0700
You say 1st and 2nd IF filters, so I assume you have an OMNI
V or VI.  I would check the PBT and make sure it is somewhere
near the center.  Then hit the sidetone to make sure you have
a rough idea of the beat note.  Then tune in a signal that 
sounds close to that tone.  Hit the CW filter.  Use the PBT,
not the tuning knob, and look for the signal.  This might
give you a feel for the thing.


FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>