Hi Jim, de Joe AA4NN
On Sun, 15 Aug 1999 14:37:50 -1000 "Jim Reid" <email@example.com> writes:
>Not sure I should have done this. I fixed
>up an Alpha/Delta four way coax switch
>from my C4 beam on the way to my rigs.
>Now I can immediately compare the "sound"
>of three rigs: the Omni VI+, the Triton IV
>digital (544) and the Yaesu FT-1000D.
Why not, Jim, it is very reasonable to have the capability
to switch between rigs. I use the old Heathkit coax switch
to select either of the Omni VI+, Corsair II, or Triton 540.
In addition, I put a wafer switch on the shaft going to the
heathkit switch so when I switch rigs the wafer switches the
keying line (as I am all CW here) and the headset line, both
to a common point where my keyer and headset plug in.
>BTW, has anyone ever come up with a mod to
>the Triton to replace the sawtooth sounding CW
>sidetone to something more pleasant to listen
>to over time?
Hi, that is an awful sound on the Triton. Hope someone will
respond with a mod where the pitch and volume is adjustable.
Vy 73, de Joe AA4NN
Eastern Top Band ARC, Carolina DX Assn, Carolina CW Ops,
Fairfield County Contesters, Ten-Tec only, CW only.
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com