[Top] [All Lists]

[TenTec] Hot Heat Sink on Omni 6+

To: <tentec@contesting.com>
Subject: [TenTec] Hot Heat Sink on Omni 6+
From: James Morgan" <dinsmore@gte.net (James Morgan)
Date: Mon, 1 Nov 1999 03:14:35 -0000
Had the same problem with a Scout... extremely high temps on the
heat sink... Leave the rig on receive and measure the current drawn,
(mine for the Scout was 6 amps instead of the 0.5 amp as indicated
in the specs.)... compare your reading with the specs... if it is excessive
back to Tn for a vacation.. My rig was back in 10 days replaced under
warranty free of charge as usual... been working fine since.
                                                  Good luck and 73  Jimmy

FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>