Maybe tonight, right now it is simply a display mode only type thing. I
have the filters and mode switching enabled, now to the frequency.. I have
had some suggestions , will try and figure out what works the best.. When I
get it a little closer to what I want, I will let anybody have a copy..
This is just a 'fun' project... hihihihihi!
At 09:12 AM 10/4/99 , you wrote:
>Can I have a sneak peak at your program??? I would like to run my Omni VI+
>remotely via computer too.. not interested overly in logging capabilities..
>but just operation of the rig...
>Mike Kelly, K5AWI
>----- Original Message -----
>From: Robert <email@example.com>
>Sent: Monday, October 04, 1999 9:06 AM
>Subject: [TenTec] Darn this interface!
> > OK,
> > I now have a pretty good working program... About 90% of the time it is
> > right on the nose as to displaying on the PC what is going on with the
> > Omni. The other 10% of the time the FREQ is totally wacko! Can someone
> > me about the handshaking between the PC and the Omni? Should I be using
> > software (Xon/Xoff), hardware (CTS/RTS) or none (probably not..)..
> > I have added a small (1 second) delay between the time the pc issues a
> > command to read the freq and the time the pc goes and looks for the data..
> > Usually that clears it up, but I have noticed times when even 2 or 3
> > seconds still returns invalid data. When I step thru the program in debug,
> > it always works (so, what else is new??)
> > Any suggestions would be appreciated...
> > --
> > FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> > Submissions: firstname.lastname@example.org
> > Administrative requests: tentec-REQUEST@contesting.com
> > Problems: email@example.com
> > Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com