Congratulations Robert... Good work...
I would like to tune the radio in nearly the same way one do it
with the freq. wheel.
My sugestion is to implement the freq. tuning by using the
mouse wheel. most of the computer mouse has that wheel and lots of
software started to use it. By turning it up or down one could
change the frequency up or down. (as you scroll the browser)
The aspect of the delay should be taken to slow down the rate and to
synchronize the PC with the Omni...
One must try to see if it is possible, If it is it would be great.
As far as I recall you use visual C++ or Visual basic, I assume that there
should be a macro or function supporting the mouse turning wheel.
GL Piotr LA9HFA
At 09:25 AM 10/4/99 -0500, you wrote:
>Maybe tonight, right now it is simply a display mode only type thing. I
>have the filters and mode switching enabled, now to the frequency.. I have
>had some suggestions , will try and figure out what works the best.. When I
>get it a little closer to what I want, I will let anybody have a copy..
>This is just a 'fun' project... hihihihihi!
>At 09:12 AM 10/4/99 , you wrote:
>>Can I have a sneak peak at your program??? I would like to run my Omni VI+
>>remotely via computer too.. not interested overly in logging capabilities..
>>but just operation of the rig...
>>Mike Kelly, K5AWI
>>----- Original Message -----
>>From: Robert <firstname.lastname@example.org>
>>Sent: Monday, October 04, 1999 9:06 AM
>>Subject: [TenTec] Darn this interface!
>> > OK,
>> > I now have a pretty good working program... About 90% of the time
>> > right on the nose as to displaying on the PC what is going on with the
>> > Omni. The other 10% of the time the FREQ is totally wacko! Can someone
>> > me about the handshaking between the PC and the Omni? Should I be using
>> > software (Xon/Xoff), hardware (CTS/RTS) or none (probably not..)..
>> > I have added a small (1 second) delay between the time the pc issues a
>> > command to read the freq and the time the pc goes and looks for the
>> > Usually that clears it up, but I have noticed times when even 2 or 3
>> > seconds still returns invalid data. When I step thru the program in
>> > it always works (so, what else is new??)
>> > Any suggestions would be appreciated...
>> > --
>> > FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>> > Submissions: email@example.com
>> > Administrative requests: tentec-REQUEST@contesting.com
>> > Problems: firstname.lastname@example.org
>> > Search: http://www.contesting.com/km9p/search.htm
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Administrative requests: tentec-REQUEST@contesting.com
Piotr Tomczak Ham call: la9hfa
Nera ASA Tel: +47 6724 3135 Fax: +47 6724 4445
1361 Billingstad E-mail job: email@example.com
Norway E-mail home: firstname.lastname@example.org
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com