It's not that critical.
Go to Radio Shack and get a four conductor cable of whatever
length is convenient for your 301 placement at your station.
Try RS part number 278-777, $8.99 for 30 feet, 4-26g with "100%
foil shield and a 75% overlap of wire braid" (?). . -- from my
96 RS catalog....
Or check Home Depot's electrical wire department and see what
From: Henry Mauro <firstname.lastname@example.org>
To: email@example.com <firstname.lastname@example.org>
Date: Monday, October 04, 1999 22:49 PM
Subject: [TenTec] model 301 cable
>I purchased a model 301 kit (remote vfo knob in a box for the
Omni 6) a
>while back. I was unable to find suitable cable for it locally.
>According to the instructions on KG5U's web site, it is supposed
to be a
>3-conductor, shielded cable. I found a 4-conductor cable but it
>large to fit the strain relief provided with the kit, and the
>looked large for the molex connector on the encoder. Anyone have
># and/or source for the right cable?
>FAQ on WWW:
>Administrative requests: tentec-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com