The Pegasus does not have a special interface. It is simply a asynchronous
Since (my understanding is tha)t the Pegasus software is done in VB (perhaps
an older version since 16 bit is apparently supported, any serial port which
is supported by the operating system should be OK.
So the real question is whether you have a serial port sitting on the USB
with a driver which is compliant with what ever operating system you are
Or am I missing something.
From: Edmonds, J.B. <firstname.lastname@example.org>
To: 'email@example.com' <firstname.lastname@example.org>
Date: October 07, 1999 4:04 PM
Subject: [TenTec] Pegasus Programming and other items of wishful nature
>The info I have says the Pegasus receiver is basically a RX-320. I bet the
>command set is the same. Why would Tentec reinvent the wheel? Now
>transmitter functions are another matter.
>My questions are more basic. Can you run a contesting program with the
>Pegasus and still use the "front panel" for radio control or is it a
>or"? I would have liked to seen an auxillary control (serial) port for
>interface to a contest program. Better yet a USB interface from the
>to the computer.
>Now for my real question. Will someone step forward and build a plug-in
>replacement processor board and RS-232 interface for the Paragon 585? When
>completed, that could be the THE rig to own. Giving of course that the
>command set is robust enough to be useful. I see someone is making such a
>board for the Kenwood 930...... The 930 is now even MORE popular.
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Administrative requests: tentec-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com