>A little confusing..
>Is TRLog saying they will not support the oMNI VI ? And TT
should make it
>like the 850 ?
No. He is saying that the command set could be like Kenwood's
and thus be more versatile. As I understand it, there are
functions which the Kenwood command set contains that the Ten-Tec
software command set does not. I'm not exactly sure what they
are altogether, but things like turning RIT on/off/zero, ooching
the VFO, switching VFO's may be some of them. Tree likes the
Omni VI, but would prefer to see it with a different command set
or like he said below, an option to use one command set or the
other as the user prefers--like your keyers...A or B and do you
want fries with that?
>From: Dale L. Martin <firstname.lastname@example.org>
>To: email@example.com <firstname.lastname@example.org>
>Date: October 07, 1999 12:28 PM
>Subject: Re: RE: [TenTec] Pegasus Programmin Specification,
>> Software is a main product of Ten Tec, has
>>>been for some time.
>>Larry, et al,
>>It's been a product of their hardware for some time. I'm not
>>sure it might be viewed (even by them?) as a "main" product.
>>Larry Tyree, N6TR, writer of TRLog contest logging software has
>>for a long, long time wished Ten-Tec would change their code.
>>Witness this recent (last night) posting of his reply to a
>>> I am really enjoying the enhanced control that TRLog gives me
>>> newly-acquired TS-850 compared to my Omni VI. One thing that
>>> noticed, though, is that when I am in the S&P mode and use
>>> to change frequency, the rig makes annoying "beeps", which
>>> difficult to hear the signals you are trying to tune in. Is
>>there some way
>>> to turn this off on the 850, or is it a TRLog "feature"?
>>You need to disable the beeps in the 850. I forget if it is a
>>volume control inside the radio that you need to turn down - or
>>if it can be disabled with one of the menus.
>>At least that is better than having to put a piece of black
>>the front panel of the Yaesu radios!
>>About the Omni VI - I still wish TenTec would adopt the Kenwood
>>as an option. It isn't that hard to implement two command sets
>>let the user decide. This would open to door up to making the
>>VI play with TR Log as well as the 850.
>>Apparently, there are things in software that can and cannot be
>>done with the firmware the Omni VI contains. It is a bit
>>disconcerting to see and hear about the 'other guys' ability to
>>do things and the Omni VI can't (Shift keys have no effect on
>>Omni VI). I guess we're back to the "better receiver"
>>FAQ on WWW:
>>Administrative requests: tentec-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com