[Top] [All Lists]

[TenTec] Omni 6 blues!

To: <tentec@contesting.com>
Subject: [TenTec] Omni 6 blues!
From: aa8ve@juno.com (JEFF S JOHNSON)
Date: Sat, 9 Oct 1999 11:26:07 -0400
This almost sounds like a problem on the transmit lo-pass filter board.
May have a stuck or burned out band relay. This board is a real stinker
to get to and check out plan on a good day or so. Before getting into it
make sure you are getting correct signal voltage to the board. 
Good luck   -Jeff-  aa8ve

On Sat, 9 Oct 1999 08:52:27 -0500 "Dwight W9YQ" <dgbcms@netnet.net>
> I got to work with the rig some more this morning ... beyond
> the VOX problem, I found no xmit on 80/75m but okay on all
> other bands. In addition I got reports from a few Qso's on
> CW that the rig sounded like it was outputting a couple of
> signals 30 khz apart.
> Think I heard about this a few years back on this reflector.
> Any further ideas?
> 73 Dwight W9YQ

Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>