This almost sounds like a problem on the transmit lo-pass filter board.
May have a stuck or burned out band relay. This board is a real stinker
to get to and check out plan on a good day or so. Before getting into it
make sure you are getting correct signal voltage to the board.
Good luck -Jeff- aa8ve
On Sat, 9 Oct 1999 08:52:27 -0500 "Dwight W9YQ" <firstname.lastname@example.org>
> I got to work with the rig some more this morning ... beyond
> the VOX problem, I found no xmit on 80/75m but okay on all
> other bands. In addition I got reports from a few Qso's on
> CW that the rig sounded like it was outputting a couple of
> signals 30 khz apart.
> Think I heard about this a few years back on this reflector.
> Any further ideas?
> 73 Dwight W9YQ
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com