[Top] [All Lists]

[TenTec] VOX operation Omni 6

To: <tentec@contesting.com>
Subject: [TenTec] VOX operation Omni 6
From: vbbond@ix.netcom.com (vbbond@ix.netcom.com)
Date: Mon, 11 Oct 1999 09:44:15 -0700
Robert wrote:
> I noticed on the 705, that the VOX switch on the bottom of the mic MUST
> also be in VOX mode... So, on my Omni Vi+ the configuration to run VOX is
> Vox mode on Omni lit (on), 705 mic switch on bottom set to VOX, and, the
> lock button enabled (little black button) so that the red led on mic is
> activated.

According to the instructions that come with the TT705, "When using the 
microphone with Ten-tec transceivers, however, this switch must be in 
the PTT position." The slide switch on the bottom of the mic is provided 
for use with non-TT gear. When using an Omni 6+, you only need to press 
the VOX button on the rig and lock the mic on with the black button on 
the mic. Hope this helps.

FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>