i just checked my centaur again, i had it turned off, and in QSK and
STANDby mode.i had no signal on my watt/swr meter. i clicked the centaur on
and i am able to transmit to my antenna now. i quess something is wrong
thanks and 73's
fists # 4101
At 08:08 PM 10/11/99 -0400, you wrote:
> You should be able to place the STANDBY switch in that mode and transmit
>without the amp on. If it's not working that way, then there is a
>problem. (I had them check this specifically before I bought mine.)
> 73, Duane AC5AA
>On Mon, 11 Oct 1999 18:51:45 -0700 Bill Capps <email@example.com>
>> i have recently purchased a CENTUAR and i have it hooked up
>> to my paragon
>> 1.I use this amp mainly for 160 and 80 meter dx work. I have yet to
>> use it
>> on any of the other bands.
>> i have a problem, that i cant fiqure out. I am unable to
>> key my paragon
>> (i'm cw only), without first turning on the centuar, and placing it
>> in the
>> "standby mode".
>> i enjoy working the others bands like 20/15/10 but it is a
>> headache to
>> have to crank up the amp (and listen to the blower motor) , when
>> 100 watts is all that is needed.
>> i have read through the owners manual several times, and
>> have found no
>> mention of my problem.
>> also, i really enjoy this amp and recommend it to others. it
>> has really
>> helped my signal alot on 80/160 dx!
>> any ideas??
>> thanks es 73's
>> bill capps
>> auburn, alabama
>> fists #4101
>> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>> Submissions: firstname.lastname@example.org
>> Administrative requests: tentec-REQUEST@contesting.com
>> Problems: email@example.com
>> Search: http://www.contesting.com/km9p/search.htm
>Duane Calvin, AC5AA
>vacationing in Cincinnati for "Tall Stacks",
>America's Steamboat Festival, 1999
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com