TenTec
[Top] [All Lists]

[TenTec] Logging with Pegasus

To: <tentec@contesting.com>
Subject: [TenTec] Logging with Pegasus
From: w5yr@swbell.net (George T. Baker)
Date: Fri, 15 Oct 1999 11:28:27 -0500
Yes, Steve, it does.

I have interfaced the Logger program to my Icom IC-765 with the Icom
CT-17 Level Converter. I use a single serial port to the CT-17 and the
program shares that port to allow independent control of the DTR control
line (Pin 20) for keying the radio PTT line.

Through the CT-17, Logger reads the frequency and mode of the radio
constantly - polls about twice per second. This information is displayed
on the logging input form and is automatically placed in the logging data
base when a contact is logged. I think that the program can do additional
things, but I haven't gotten that far yet.   ;^)

Logger also provides a terminal program capability for a TNC. I will
shortly use another serial port to connect to an AEA PK232MBX TNC for
RTTY, packet (DXCluster spotting), etc.

Because my computer - like almost all systems these days - has only one
available serial port, I use a USB port expander to gain 4 additional
serial ports and 2 additional USB ports. This is the Entrega HUB-2U4S
product available for about $140 street at most catalog houses.

Otherwise, the program does as you say - "tap into the audio channel"
with the soundcard to provide the data required for PSK31 operation.

I highly recommend Logger as a very flexible and competent logging
program. It is NOT a fancy contest logger but for routine operation it
provides a great front-end for digital operations with easy-to-use
logging capabilities. And, it's free!

72/73, George        AMA 98452          R/C since 1964                 
Amateur Radio W5YR, in the 54th year and it just keeps getting better!  
AutoPOWER Systems, Fairview, TX (30 mi NE Dallas)  Collin County
QRP-L QRP-ARCI FISTS NORCAL ZOMBIE ARS 10-X  33.2 N 96.6 W EM13RE


Steve Baron - KB3MM wrote:
> 
> George,
> 
> Does your logging program 'do anything with the radio' i.e. try to read
> frequency, set frequency, or anything other than just tap into the audio
> signal ?

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>