[Top] [All Lists]

[TenTec] Pegasus programming, some typo's it seems

To: <tentec@contesting.com>
Subject: [TenTec] Pegasus programming, some typo's it seems
From: kayser@king.igs.net (Larry Kayser)
Date: Wed, 20 Oct 1999 18:29:58 -0400
Has anyone else been looking at the Pegasus programming manual?

There seem to be a few typo's which is certainly to be expected.  Guessing
for the right answers
I have the command string for the FISTS frequency on 20 as

"N5C460AAA62A4"+vbCr with a Bandwidth of 1050 and a Cbfo of 525 for 14.058

My assumptions on the correct formulas could certainly be wrong, has anyone
put an RS-232 PIC on their cable between the Pegasus and their computer and
been watching the data streams going by?  A Pic is a three wire with a
switch connector from Pins 2 and 3 of the RS-232 cable on one Com port wired
over to the other Com port so you can watch with a different program what is
going up and down the cable to the Pegasus.

Lots of good things are possible with the way they have chosen to set-up
this radio, this is going to be another fun radio for a lot of us....


FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>