The DB-25 on the Omni VI is a female connector.
Here's what I did, Terry:
1. Get three DB-25's; one male (pins), two female (sockets).
2. Wire up one DB-25 female for the VFO. Label the connector/cable
3. Wire up the second DB-25 female for the Computer. Label the
4. Wire both DB-25 females to the appropriate DB-25 male connector
Now, you have maximum flexibility and have made only about 16 or 20
73 and enjoy.
From: firstname.lastname@example.org <email@example.com>
To: firstname.lastname@example.org <email@example.com>
Date: Sunday, October 24, 1999 11:08 AM
Subject: [TenTec] OMNI-VI+ RS232 connector
>I have an OMNI-VI+ on order and want to make up the cable for the
>control and remote VFO (301 kit) control. What gender is the 25 pin
>connector on the back of the rig? I got the pinouts from K4OJ's NCJ
>piece published last year but was unable to determine whether the rig
>had male or female so I could get the correct connectors.
>Terry Zivney, N4TZ/9
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Administrative requests: tentec-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com