Below sounds not quite as it should,
my 215P, out of the base, is nearly 8 inches
long! Also, the 215P does NOT use an Electret
element; it has a piezoelectric ceramic cartridge.
The electret element requires a bias voltage,
the 215P does not. The 215P is really an Electrovoice
mike (a founder of Ten Tec came from Electrovoice,
I am told).
I doubt if the mike below is the one for which
you are looking.
73, Jim, KH7M
> Not being familiar with model numbers of the TT mics, I'll try and
> this mic . . . It sits in a small base, but can be lifted out and used
> handheld. The housing for the mic measures 1.5 inches wide and narrows
> to 1 inch where it sits in the base. When the mic is sitting in the
> base, it
> is 6.5 inches tall and sits back at a slight angle. There's an on/off
> built in the housing and it has the word Electret silk screened on the
> housing along with the TT logo. The overall condition of the mic is like
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com