I looked on the unofficial tt web site under "mods" and can't find any
reference to an RIT mod for the Scout much less anything to do with
frequency jumping. Could you help?
----- Original Message -----
From: Carl Hyde <email@example.com>
To: James Parsons <firstname.lastname@example.org>; Clark Savage Turner
Cc: Beamer, Jay <JBeamer@PanAmSat.com>; <email@example.com>
Sent: Friday, October 29, 1999 1:54 PM
Subject: Re: [TenTec] Tentec Scout/ "Anything Positive"
> Well James for about $3.00 and 10 minutes soldering
> time you can fix that problem and install a RIT
> circuit at the same time. The mod is on the unnoficial
> Ten Tec page and in QSTs Hints and Kinks book. I
> modified mine, installed the RIT circuit and it works
> great. Doesn't drift a bit at 30 WPM or higher.
> Ever since I discovered PSK-31 I haven't been on CW
> but the Scout does a real nice job on PSK-31, with or
> without the mod.
> > I operate 95 percent CW. I operate around 30 WPM. I
> > found that at that
> > speed the rig would jump and drift right out of the
> > other fellows
> > bandpass. If I operated around 20 WPM or less, no
> Carl S.HYDE
> Eagles May Soar, But Weasles Never Get Sucked Into Jet Engines!
> Politics: From the Greek word Poli, meaning many and
> the word tics, meaning blood sucking parasites.
> Do You Yahoo!?
> Bid and sell for free at http://auctions.yahoo.com
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: firstname.lastname@example.org
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: email@example.com
> Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Administrative requests: tentec-REQUEST@contesting.com