The manual doesn't say what the impedance is but I connected my mic to it
and it worked just like it did in the mic input. I used a xfmer with a
500 to 8 ohm ratio just to get the turns ratio. Some guys are using 1:1
transformers and attenuators but I figured why not let the xmfr do both
jobs.
Dave, VE1ADH
On Mon, 15 Nov 1999, Ken Brookner wrote:
>
> reggie,
>
> whoops... i wasn't clear... too many things with too many ports with too
> much nomenclature!
>
> i guess on the tentec peg, the aux port *is* where you plug in the remote
> tuning knob, and the accessory port is where you can hook up audio in/out
> and ptt. that's the one i was talking about (the one that tentec
> thoughtfully supplied the cable with the 4 RCA jacks).
>
> i don't have my manual here so i can't say for sure whether the audio input
> to the peg there is at 8 or 500 or ?? ohms. if it's 8, i'll be surprised.
> but then it wouldn't be the first time.
>
> sorry for the confusion!
>
> kenb
>
> ----- Original Message -----
> From: Reginald Mackey sr. <k6xr@earthlink.net>
> To: Ken Brookner <kenb@brookner.com>
> Sent: Monday, November 15, 1999 11:47 AM
> Subject: Re: pegasus and psk31
>
>
> > wow! I misunderstood you! I thought you meant the accessory input. I'll
> > have to check the aux input.
> >
> >
> > Reggie, (k6xr) Southwest Bakersfield, Ca.
> >
> >
> >
> >
> > ----- Original Message -----
> > From: Ken Brookner <kenb@brookner.com>
> > To: <tentec@contesting.com>
> > Cc: <k6xr@earthlink.net>
> > Sent: Sunday, November 14, 1999 10:08 PM
> > Subject: re: pegasus and psk31
> >
> >
> > > reggie, i've been doing some pks31 with my pegasus. am using the aux
> > input
> > > on the pegasus, through a pad and 1:1 transformer to the line out on the
> > > sound card. audio is adjusted such that the alc never quite lights -- i
> > > could probably bump the audio up a little but so far have not needed to.
> > >
> > > be aware that, at least on mine, the mic gain control in the software
> does
> > > not effect the aux-in audio.
> > >
> > > have fun!
> > > kenb, n5lpi/7
> > > _______________________________
> > > kenb@brookner.com
> > > kenb@qatrix.panther.net
> > > ...!rwsys!rowdy!qatrix!kenb
> > >
> > >
> > >
> >
> >
>
>
> --
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|