TenTec
[Top] [All Lists]

[TenTec] FS: Ten Tec Filters

To: <tentec@contesting.com>
Subject: [TenTec] FS: Ten Tec Filters
From: K5BDZ@aol.com (K5BDZ@aol.com)
Date: Sat, 22 Jul 2000 12:58:18 EDT
I changed my Argosy filter caps over 10 years ago, so don't have the 
documentation. BUT
If any of you will supply the following information for the TT group to see, 
I'll give you some BASIC guidlines, with guestimate cap values to start your 
experiments with filter bandwidth changing.
1.  TenTec filter IF frequency (frequency of the crystals) and number of 
crystals in the filter
2.  Values of each of the caps in the filter
3.  Current filter bandwidth
4.  NEW preferred filter bandwidth.
That should get us started.  I WILL NOT engineer the values, only provide 
approximate values (standard values available from Mouser, etc) to get you 
headed in the right direction.
Remember to reply through the whole TenTec net with your questions so all can 
benefit from the answers (or pick my bones apart!!)
Bill K5BDZ

--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>