Jerry:
I don't agree. The front panel has a hole punched in it for the
speaker. This hole forms a current loop, in which current is induced
from the power transformer stray field. In essence this is a shorted
turn, electrically, in the field of the power transformer. It creates a
quite high magnet flux outside of the cabinet.
73
Bob K4TAX
Gerald C Totten wrote:
>
> I have had the power supply on top of the radio with no problems. If the
> bridge rectifier is OK ( all the diodes are the same ) there should be
> very little magnetic field outside the power supply case.
>
> Jerry K8JRO
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|