TenTec
[Top] [All Lists]

[TenTec] TRITON IV Question

To: <tentec@contesting.com>
Subject: [TenTec] TRITON IV Question
From: winjones@ix.netcom.com (Winston F. Jones)
Date: Thu, 7 Dec 2000 22:30:16 -0500
Hi Gary,
Does the Triton IV have a crystal installed for that segment? That could be
the problem.

Also, I had a Triton IV analog which was having problems with 10 meters. Was
not transmitting and auxiliary digital dial read only 9 Mhz. The problem was
in the bandswitch. There is another bandswitch in addition to the large knob
and the smaller 10-meter only knob. It is behind the front panel and linked
to the large bandswitch. The linkage was loose in mine so all the necessary
switching wasn't taking place. Once I repaired it, the Triton worked great.
It did require removing the front panel and all the knobs to get to it.
73, Winston K4CWQ

----- Original Message -----
From: "Gary McCaughey" <MAIL4GARY@worldnet.att.net>
To: <tentec@contesting.com>
Sent: Friday, December 08, 2000 1:12 AM
Subject: [TenTec] TRITON IV Question


>
> Hello TenTec'ers,
>
> I got my hands on Triton IV Digital in pretty good
> condition.  Usual wear on the lettering on front.  Here is
> the question.  The first segment of 10 mtrs (28.0 to 28.5
> MHz) does not work.  But....the other three segments do.
> When I set switch to first segment the digital display just
> reads out 9 MHZ which we know is the intermediate frequency
> for the rig.  The way I see the schematic, if the other
> segments work, then the only thing I can assume is that the
> XTAL for the first segment is bad.  I have checked solder
> joints and cleaned switches.
>
> Other ideas or comments?
>
> Thanks
> Gary
> W2UX
> Lexington, SC
>
> CW is the REAL THING, USE IT or LOSE IT!
>
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/tentec
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>