Since there seemed to bo conflicting reports about noise and the LDG tuners,
and there have been several versions, I decided to ask LDG.
Their response is below.
----- Original Message -----
From: "LDG Electronics, Inc." <ldg@ldgelectronics.com>
To: "Steve Baron - KB3MM" <SteveBaron@starlinx.com>
Sent: January 16, 2001 12:58 AM
Subject: RE: 11MP
> AT-11s That are 3 years or older will generate noise on receive. None of
the
> newer AT-11s produce any noise on receive. The new ones are AT-11 with
> version 2.5 PC board or any AT-11MP.
>
> Dwayne Kincaid
>
> --------------------------------------------
> LDG Electronics, Inc.
> 1445 Parran Road, PO Box 48
> St. Leonard, MD 20685
> Tech Support: 410-586-2177
> Toll Free Order: 1-877-890-3003
> 24 Hour FAX: 410-586-8475
> www.ldgelectronics.com
> --------------------------------------------
>
>
> -----Original Message-----
> From: Steve Baron - KB3MM [mailto:SteveBaron@starlinx.com]
> Sent: Sunday, January 14, 2001 11:15 PM
> To: ldg@ldgelectronics.com
> Subject: 11MP
>
>
> Been thinking about buying one of your kit, but recently saw some comments
> on the Ten Tec reflector about noise apparently generanted by your tuner
and
> interfering with operation.
>
> Is this a possibility ?
>
>
>
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|