[Top] [All Lists]

[TenTec] Help!!Omni C Problem

To: <tentec@contesting.com>
Subject: [TenTec] Help!!Omni C Problem
From: jmerrill1@adelphia.net (John L Merrill)
Date: Wed, 22 Aug 2001 22:24:29 -0400
If you dont have an external vfo there might be a jumper missing or
defective on the back of the radio. As I recall it jumpers vfo in and vfo

----- Original Message -----
From: "Wm Marvin" <wmarvin@mnic.net>
To: <tentec@contesting.com>
Sent: Wednesday, August 22, 2001 8:31 PM
Subject: [TenTec] Help!!Omni C Problem

> Hello All,
> I recently bought a Omni C and PS 255.  The transceiver won't do much
> displays 9.000.0 on the display. I have no manual. Am I doing something
> upon setup?? Meter on PS says only 1/2 amp being drawn by radio. All
> light and most functions like "notch" etc work.
> Any suggestions on it??  Thanks in advance!!
> 73  Bill Marvin  KB9IV
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>