[Top] [All Lists]

[TenTec] Omni VI, using TUNE with the LDG AT-11

To: <tentec@contesting.com>
Subject: [TenTec] Omni VI, using TUNE with the LDG AT-11
From: kd7kgx@arrl.net (John Clifford)
Date: Thu, 23 Aug 2001 04:56:09 -0700

I was lucky enough to buy an Omni VI/Opt1 from another list member, so now I
can see how it really compares to the Elecraft K2 (#1678 :-) ).

Browsing thru the Omni VI manual, noticed a cable diagram for hooking up the
Ten-Tec auto antenna tuner... seems that the autotuner is triggered via a
signal from the RS-232 port (probably an unused pin).  Shouldn't be too hard
to make up a cable and/or circuit that would allow the TUNE button to put
the LDG AT-11MP in TUNE mode either... should it?  Has anyone out there done


 - jgc

John Clifford KD7KGX

Heathkit HW-9 WARC/HFT-9/HM-9
Elecraft K2 #1678 /KSB2/KIO2/KBT2/KAT2/KNB2
                  ...waiting for KPA2 & KAF2!
Ten-Tec Omni VI/Opt1

email: kd7kgx@arrl.net

<Prev in Thread] Current Thread [Next in Thread>