[Top] [All Lists]

[TenTec] Keying the Omni-6+

To: <tentec@contesting.com>
Subject: [TenTec] Keying the Omni-6+
From: tjednacz@ieee.org (Thomas C. Jednacz)
Date: Sat, 25 Aug 2001 12:37:24 -0400
The instruction manual lists a sub command to switch between transmit and
receive (PAGE 5-10 in my book). Yes it is possible to control the
transmit/receive via command instead of the PTT line.

Tom, W7QF

> -----Original Message-----
> From: tentec-admin@contesting.com [mailto:tentec-admin@contesting.com]On
> Behalf Of Eric Rosenberg
> Sent: Saturday, August 25, 2001 00:37
> To: tentec@contesting.com
> Subject: [TenTec] Keying the Omni-6+
> I'm sure this has been discussed before, but is it possible to key the
> Omni-6+ via the RS-232 interface port (instead of running a separete
> cable to the PTT input) as some of the Japanese radios do?
> Thanks,
> Eric W3DQ
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>