[Top] [All Lists]

[TenTec] RE: More About Clix

To: <tentec@contesting.com>
Subject: [TenTec] RE: More About Clix
From: paulc@mediaone.net (Paul Christensen)
Date: Fri, 1 Feb 2002 08:09:30 -0500
The operative word here is "reasonable."  Al, I don't disagree with your
statement in the least, but for most of us, securing a vector signal
analyzer simply isn't an option for our measurements.

-Paul, W9AC

----- Original Message -----
From: "LORONA,AL (A-USA,ex3)" <al_lorona@agilent.com>
To: "Ten Tec" <tentec@contesting.com>
Sent: Friday, February 01, 2002 0:59 AM
Subject: [TenTec] RE: More About Clix

> I posted a reply about measuring "microchirp" yesterday but it never made
> to the list. Here's my second try:
> --------------------------------------------------------------------------
> >>You can't.  In fact, I know of no electronic instrument capable of
> >>reasonably detecting it.  Sometimes the ear is the best judge.  The
> >>waveform oscilloscope display has no association with frequency shift.
> >>-Paul, W9AC
> In fact, you can. You need an instrument that can capture a signal without
> missing any data and then play it back while displaying frequency vs.
 > Such an instrument is called a vector signal analyzer.
 > The VSA scrolls through a display of the spectrum of the signal. In this
 > way, the horizontal axis is frequency and the vertical axis is time. If
 > plot is in color, the color can represent amplitude. This type of display
 > format is called a "spectrogram". I think some PSK-31 programs (like
 > Digipan?) show the spectrum; just imagine successive spectra scrolled in
 > display. It's hard to describe.
 > Markers can be used to measure delta freq and delta time. This is how
 > measure the start-up transient behavior of PLLs and other oscillators,
 > how law enforcement agencies positively identify a specific transmitter
 > it's start-up "fingerprint".
 > Al  W6LX
 > _______________________________________________
 > TenTec mailing list
 > TenTec@contesting.com
 > http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>