Here is how it works. My question is, since I use the external version of
this tuner will it still give me the reduced output in the tune position?
Operating the Jupiter Transceiver with built-in tuner
The optional internal tuner for the Jupiter is controlled through use of the
front panel [TUNE] button. In addition, the tuner may be disabled/enabled
via the USER MENU.
To Activate the Tune
Tune the radio to the desired frequency.
Press the [TUNE] button
The radio will key in CW mode at approximately 20 watts output.
When the minimum SWR has been achieved the tuning process will stop.
And the transceiver will return to receive mode.
The Letter 'T' will appear at the far right of the main frequency
indicating that the tuner is ready.
To Bypass the Tuner
The [TUNE] Button will toggle between TUNER ON and TUNER OFF.
The tuner is disabled and bypassed when the 'T' is NOT displayed.
To Disable the Tuner
The Tuner may be disabled by setting AUTO TUNER to OFF in the User Menu.
To enter TUNE mode without affecting the tuner setting
Press [ALT] then [TUNE ] to place the radio in TUNE mode.
The transmitter output power will be determined by the PWR setting