I checked this evening - the Omni VI+ seems to work fine with
RCKRtty here. I have my Omni on COM1, and I used the 9600 baud rate
(matches xcvr, of course), non-parity, 8 data, 1 stop. I used ICOM and
hex 4 as the address. I think his software comes with one of the parms
set differently from what we usually use - the stop bit, maybe? Check
these parms. I also reduced the time required for updating the
frequency/mode to 3 seconds. 10 seconds seemed like an eternity!
Hope this helps!
Duane A. Calvin, AC5AA
email@example.com -or- firstname.lastname@example.org
--------- Forwarded message ----------
>Date: Mon, 11 Feb 2002 09:48:48 -0600
>Subject: Re: [TenTec] Ten Tec Omni VI plus and RCKRtty
>X-Mailer: Juno 5.0.27
>From: Duane A Calvin <email@example.com>
> I have RckRTTY but haven't used it much (demo copy). I also
>my VI+ wired and operating fine with my HAL DXP38 and other software
>(mostly HAL's software at the moment). I'll resend this note so I see
>at home and give it a try this evening. I don't get home til late, so
>hopefully will see it when I get there! I seem to remember the rig
>control not working, but can't be sure until I verify.
> 73, Duane AC5AA
>On Mon, 11 Feb 2002 11:27:48 -0100 "Richard & Sherri Mortimore"
> > Hi All
> > I am using a modern Notebook 1GHz P3 with Windows ME with RCKRtty
> > v2.14
> > programme
> > and a Ten Tec Omni VI Plus model 564 and have a problem with setting
> > up the
> > Transceiver control.
> > I made up a converter cable from the Notebook's DB9 to the
> > Transceivers
> > DB25 as
> > per Ten Tec Manual. (My Ten Tec Hercules 11 amp also shares this
> > port for
> > the auto band changing).
> > DB 9 DB25
> > 2 - 3
> > 3 - 2
> > 5 - 7
> > 1 -|
> > 4 -| connected together
> > 6 -|
> > I am using the Icom radio settings hence COM1, Baud 1200, Parity N,
> > Data
> > Bits 8, Stop Bits 1, 3 sec update, enable transceiver control and
> > the
> > ICOM Address 04 Hex. My Ten Tec manual says to try 04. But it is
> > not
> > working.
> > I have checked my cable again and it seems okay.
> > I am enjoying the rest of the programme but please can you help me?
> > 73
> > Rich GW4BVJ
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>Duane Calvin, AC5AA
Duane Calvin, AC5AA