Re: [TenTec] OMNI V.9 Delay Adjust pot R32

[Jim Lowman <jmlowman@directvinternet.com>]

> I hated the relay as well.  I removed a lead from the coil (it's so long ago
> I don't remember if a trace was cut or a wire removed) and I've mounted an
> external switch.  The push button switch is on a small bracket and attached
> to the rear of the Omni V.9  with an existing screw near the RX - Antenna.
> Now the switching option is available externally.
> 
> Rick
> VE7ASR