I had the same problem with a Corsair II after I rebuilt the PTO. Traced it
to the slug-tuned coil in the PTO, not the big coil. The problem was that
the wires had never been soldered to the solder tabs on the coil form.
----- Original Message -----
From: "Stuart Rohre" <firstname.lastname@example.org>
Sent: Thursday, February 21, 2002 3:47 PM
Subject: [TenTec] Fw: [AQRP] Forwarded Re: Ten Tec Question
> Anybody see this problem and know the cause?
> I would reseat all connectors and verify all bolted grounds as a start.
> Stuart K5KVH
> ----- Original Message -----
> From: "Glen Reid" <email@example.com>
> To: <firstname.lastname@example.org>; <AQRP@yahoogroups.com>; "HQRP" <email@example.com>
> Sent: Thursday, February 21, 2002 9:32 AM
> Subject: [AQRP] Forwarded Re: Ten Tec Question
> > Any Corsair experts out there? If so your help is needed.
> > gr
> > Joe C wrote:
> > >
> > > Hello,
> > > I am a problem with my Corsair and need to find someone who is very
> > > familiar with the radio who might be able to help.
> > > The VFO is racing wildly and even displays 94.5xx in some bandswitch
> > > positions.
> > > Any thoughts or leads would be very appreciated.
> > > Thanks
> > > Joe AA5HP
> > GLEN (Just call me "BUCK") REID
> > K5FX
> > Austin, Texas