You can control the amount of speech processing with
a slider and set it from 0 to 100. Obviously, the higher
the setting the more gain. The higher the gain, the more
distortion. Most people find setting it to 50 works very
well with low distortion and high gain.
----- Original Message -----
From: "Joe Word" <email@example.com>
Sent: Friday, February 22, 2002 2:15 PM
Subject: [TenTec] Type of Speech Processing in Jupiter/Pegasus?
> What about distortion and gain?
> Joe K9MAN
> Absolutely correct Carl. It is the digital
> implementation of a logarithmic
> operational amplifier. Best way to increase average
> Tom, W7QF
> > -----Original Message-----
> > From: firstname.lastname@example.org
> > Behalf Of N4PY
> > Sent: Friday, February 22, 2002 13:39
> > To: email@example.com
> > Subject: Re: [TenTec] Type of Speech Processing in
> > Joe,
> > The speech processor in the Jupiter /Pegasus is a
> full DSP
> > implementation. It basically adds more gain to the
> > amplitude part of the speech than the higher
> amplitude part.
> > I believe this type of processing can give the best
> > in average speech power with the least amount of
> > distortion of any method yet devised.
> > Carl Moreschi N4PY
> > ----- Original Message -----
> > From: "Joe Word" <firstname.lastname@example.org>
> > To: <email@example.com>
> > Sent: Friday, February 22, 2002 12:02 PM
> > Subject: [TenTec] Type of Speech Processing in
> > > I have been reading with much interest the thread
> > > 'Digital Speech Processing & Pegasus', can someone
> > > define what type of and how useful is the Speech
> > > Processor in the stock Jupiter/Pegasus?
> > >
> > > Thanks,
> > >
> > > Joe K9MAN
> Do You Yahoo!?
> Yahoo! Sports - Coverage of the 2002 Olympic Games
> TenTec mailing list