TenTec
[Top] [All Lists]

[TenTec] field day/QRP with Jupiter

To: <tentec@contesting.com>
Subject: [TenTec] field day/QRP with Jupiter
From: wa2tti@worldlynx.net (Jerry Harley)
Date: Sun, 26 May 2002 10:32:26 -0400
Turning mine all the way down gives me 2 watts output.  Jerry

Paul DeWitte K9OT wrote:

> I run in the 1B battery catagory / QRP, usually using my Argosy II. It has a
> switch in the back that limits it to 5 watts output. Now that I have the
> Jupiter I would like to use it for field day. Cw is no problem as you can
> just put it in tune and set the output for 5 watts. Transmitting into a
> dummy load on SSB using the same setting as on CW it will light the alc but
> very little meter movement on the power meter. This is an average reading
> meter not a PEP. The scale is 0-30 watts so it should show something with 5
> watts. Has anybody tried QRP with the Jupiter on SSB and if so what setting
> on the output have you used? Thanks 73 Paul K9OT
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
> .
> 
> 



<Prev in Thread] Current Thread [Next in Thread>