TenTec
[Top] [All Lists]

[TenTec] thanks for Corsair II/SB-221 advice

To: <tentec@contesting.com>
Subject: [TenTec] thanks for Corsair II/SB-221 advice
From: uoba@satx.rr.com (JBA)
Date: Sun, 14 Jul 2002 20:29:32 -0500
Hi Woody,
I converted a few 3-500Z amps to full QSK using the circuitry that Rich
Measures designed. It also employs a vacuum relay. I am currently using this
circuit in a Drake L-7 amp. As an added benefit, the Electronic cathode-bias
switching portion of the circuit also allows you to get rid of all that heat
in the Drake L-7, L-4, or L-4B power supply by eliminating the need for
those two 50K/50watt resistors!
de Benton wb5twc


----- Original Message -----
From: <WoodMirLtd@aol.com>
To: <TenTec@contesting.com>
Sent: Sunday, July 14, 2002 12:22 PM
Subject: [TenTec] thanks for Corsair II/SB-221 advice


> Hi all,
>   Many thanks to Jim K4CGY, Gary Hoffman, Dick KD4BRL, and another OM who
> recommended the Harbach mods (sorry I can't remember the name-XYL was
> meddling with the reader and deleted) for the advice on Corsair II and
SB-221
> compatability.  One experienced toasted T/R relay contacts and another's
held
> up well (wonder if TT used a relay with higher rating?).  Dick sent a JPG
of
> a nice interface to isolate the T/R relay contacts without another relay
> clattering.  It looks similar to the Ameritron device.  I'm definitely
going
> to look into the Harbach parasitic supression mod and homebrew Dick's
> interface for peace of mind.
>   On a related note, has anyone ever made the QSK vacuum relay mod to a
> SB-221 or similar amp?
>   Last but not least, thanks for all the interesting and educational
dialog
> on the list.  I used to wonder why TT fans were so devoted until the
Corsair
> II displaced my ICOM.  Being in a rush to get on the air, an incorrect
> connection was made to the external VFO.  It was right before Christmas
but I
> called TT anyway.  I was immediately connected with a technician familiar
> with the Corsair II who ran through the schematic and had an answer within
5
> minutes.  He even offered to throw a low signal NPN transistor in the
mail,
> but fortunately there was one in the junk box.  We were up an runing in
about
> 15 minutes.  Thanks again TT!
> vy 73,
> Woody   N5ZU . .
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> ---
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
To: <tentec@contesting.com>
Version: 6.0.375 / Virus Database: 210 - Release Date: 7/10/2002


<Prev in Thread] Current Thread [Next in Thread>