TenTec
[Top] [All Lists]

[TenTec] extra dits from Omni 6+?

To: <tentec@contesting.com>
Subject: [TenTec] extra dits from Omni 6+?
From: calderman@cox.net (Chester)
Date: Sat, 4 Jan 2003 10:35:44 -0500
Hi Mike,

        I know how frustratingly long it takes to set up a bug to one's
liking, but your problem is certainly a strange one. I've been using a
Zephyr, a Blue Racer, a Lightning Bug, and my computer keying program on
my Omni 6+ for some 10 years now and have never experienced the problem
you have.
        I have my set up all packed away now for an upcoming move, but I
vaguely recall something in the manual about a resistor change you can
make for particular keying problem. The resistor is for keying and not
for wave shaping.

        Good luck and I'm sure you will find the Omni 6+ to be a superb
CW radio for you.

73,

Tom/W4BQF

Chester Alderman
calderman@cox.net

-----Original Message-----
From: tentec-admin@contesting.com [mailto:tentec-admin@contesting.com]
On Behalf Of Mike J Maloney
Sent: Saturday, January 04, 2003 9:23 AM
To: tentec@contesting.com
Subject: [TenTec] extra dits from Omni 6+?

I recently acquired an Omni 6+.  I enjoy using a bug for operating
around
25wpm.  I have noticed that the rig "throws" in extra dits randomly.  
Very frustrating when I know I'm not making them.  The key is well
adjusted and does not do this on other rigs or a cpo.   There is no
problem when using an external or the internal keyer.   

Has any one else experienced this phenomonen and/or have any ideas for
the cause and solution?
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


<Prev in Thread] Current Thread [Next in Thread>