put the 1.8 in one of the cw filter postions does it work? if it does filter
is ok. the filters are diode switched? try one of the other filters being
switched, use it as a reference . check to see if the voltage is being
applied to the diodes. make sure with filter installed it isn't shorting out
a component. lift it up just a tad the leads are long. use the schmatic,
manual and ur gray matter. call tentec service guys (omni6) , they don't bite
and you can get some very good info from them.cultivate a good relationship
its worth it. 73 and good luck john wa9dgm/6
|