TenTec
[Top] [All Lists]

[TenTec] Pegasus and HamScope

To: <tentec@contesting.com>
Subject: [TenTec] Pegasus and HamScope
From: cherry@getnet.net (Jim FitzSimons)
Date: Tue Mar 4 17:16:20 2003
Before I had a interface, I used VOX on my Pegasus. You need to adjust the
VOX and all
the delays until it works smoothly. I use the accessory input and output so
there is one
cable connecting my Pegasus to the soundcard. You need to put an attenuation
is the
accessory input, since most sound cards put out too much level for the
Pegasus.
I now use a USB to serial converter to key my Pegasus.
Jim W7ANF

----- Original Message -----
From: "Wayne" <aa5jj1@cox.net>
To: <tentec@contesting.com>
Sent: Monday, March 03, 2003 21:18 PM
Subject: [TenTec] Pegasus and HamScope


I am trying to get my Pegasus to operate with HamScope, it is digital
software that runs PSK31 RTTY and other digital modes a ver good program.
The problem I am having is getting the rig to key up so the audio from the
sound card can inter the input on the Pegasus I am using both Comm ports on
my computer and do not have any more. I think there is a way to get it to
key up with VOX but I am not sure how. " I am using the ACC plug on the
front of the Pegasus to try and do this. If anyone out there is doing this
please tell me how.

73 Wayne AA5JJ



<Prev in Thread] Current Thread [Next in Thread>