TenTec
[Top] [All Lists]

[TenTec] More IP3 Stuff

To: tentec@contesting.com
Subject: [TenTec] More IP3 Stuff
From: John Rippey <w3uls@3n.net>
Reply-to: tentec@contesting.com
Date: Sun, 09 Mar 2003 08:06:47 -0500
List-post: <mailto:tentec@contesting.com>
Given the variables involved in lab data results and their interpretation, as discussed in this thread, there seems to be no substitute for in-home evaluations of transceiver performance by each ham as the final arbiter.

This is no panacea, though, because it's an expensive, time-consuming process to obtain, evaluate, compare, resell and then ship out individual rigs.

As an additional complication, most of today's transceivers are designed to be pretty much all things to all people--to provide all kinds of modes, options, etc., at a certain price point. Each transceiver therefore consists of many complex compromises--determined by a host of design/production decisions, with an end result that can be a mish-mash--perhaps very appealing to some while leaving others unimpressed. (As one example, the IC-756 PROII's "dual watch" feature is not the same as Yaesu's separate receivers in the 1000 series because, as I understand it, in producing the 756 PRO is basically a military transceiver converted to amateur use and the original military specs did not call for dual receivers.)

Furthermore, as perhaps in the case of an FT-920 I owned, the rig obtained may not meet factory specs, unbeknownst to the purchaser. In other words, the ham could be attributing certain faults to a model generically when in fact the specific rig under evaluation is defective. This means, ideally, that two or three samples of each model (ugh!) should be evaluated before reaching a conclusion.

In spite of the valiant ongoing efforts of the ARRL, and to a lesser extent CQ Magazine, the reports they provide can only be a first cut in the evaluation process. (If you don't have a good curve ball, you won't be invited to spring training.) Ultimately, each ham's selection of his/her "ideal" transceiver has to be up to him/her, acting alone. And it's a complicated, lengthy process. No wonder so many hams either hang on to their tried-and-true transceivers from the 80's or, if buying a new rig, fall back on brand loyalty as their selection criterion. Being loyal to a brand does greatly simplify life. And the good news is that most (all?) of the rigs today are pretty good all-round performers so it's not as if you end up with a poor performer no matter what rig is chosen and by what selection process.

The foregoing makes me wonder how many hams who are not now Ten-Tec owners will be motivated to explore on their own the Orion when it becomes available--meaning not just reading up on it but actually buying one?

73,
John, W3ULS

<Prev in Thread] Current Thread [Next in Thread>