[TenTec] 238A rotary switch knobs

To:	<tentec@contesting.com>
Subject:	[TenTec] 238A rotary switch knobs
From:	w5ben@arrl.net (Duane Budd)
Date:	Tue Mar 11 08:02:43 2003

If someone has such a broken knob and will send it to me, I
will take a look and see if it is feasible to turn out a
piece of tubing on my lathe with the characteristics
suitable for repair.

If it is possible, the fabrication of suitable rings to slip
over the inside of the knob should be a snap.

73

Duane Budd
<mailto:w5ben@arrl.net>
Johnson City, TN

<Prev in Thread]	Current Thread	[Next in Thread>
[TenTec] 238A rotary switch knobs, Rob Atkinson, K5UJ [TenTec] 238A rotary switch knobs, Troy Wideman [TenTec] 238A rotary switch knobs, Robert & Linda McGraw K4TAX [TenTec] 238A rotary switch knobs, Richard Robinson [TenTec] 238A rotary switch knobs, Bill Miner [TenTec] 238A rotary switch knobs, Ken & Linda Burrough [TenTec] 238A rotary switch knobs, WA3FIY [TenTec] 238A rotary switch knobs, w2fca@cs.com [TenTec] 238A rotary switch knobs, Duane Budd <=

Previous by Date:	[TenTec] OmniVI Opt3/OmniVI Plus, RBeaver@aol.com
Next by Date:	[TenTec] Switching noise, Mark Erbaugh
Previous by Thread:	[TenTec] 238A rotary switch knobs, w2fca@cs.com
Next by Thread:	[TenTec] FS: Omni 6 Option 3 and Accessories!, Mark S. Adams, P.E.
Indexes:	[Date] [Thread] [Top] [All Lists]