My software can control the Argo V. With it, you can do direct frequency
entry from the computer keyboard amoung a myriad of other things.
Carl Moreschi N4PY
Franklinton, NC
----- Original Message -----
From: "Stuart Rohre" <rohre@arlut.utexas.edu>
To: <tentec@contesting.com>
Sent: Tuesday, March 18, 2003 12:58 AM
Subject: Re: [TenTec] Argo V questions
> The review in the April CQ magazine addresses the key input and paddle
input
> connections. You can turn off the internal keyer in the menu, and plug
an
> external keyer into the radio a number of ways. The ptt connector on the
> front, the key jack in the back (which can be used for paddles or straight
> key), and there is also a PTT terminal on the accessory connector which is
> normally used for things like a foot switch, but could be used to key the
> radio.
>
> The radio has the ability to download software updates via a computer; but
I
> am not sure if the frequency selection can be accessed for direct
frequency
> entry. It seems likely you have to go thru the control program. Since it
> is capable of the several digital modes, there is a lot of ability built
> into the radio.
> 73, Stuart K5KVH
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|